Cisco SPA300 Series Podręcznik użytkownika - Strona 29

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco SPA300 Series. Cisco SPA300 Series 38 stron. Configure ring type
Również dla Cisco SPA300 Series: Podręcznik użytkownika (12 strony), Skrócona karta informacyjna (2 strony), Skrócona karta informacyjna (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (3 strony), Skrócona instrukcja obsługi (3 strony), Instrukcja obsługi (3 strony), Podręcznik (2 strony), Podręcznik (2 strony), Skrócona instrukcja obsługi (2 strony)

Using Your Cisco SPA302D

Configuring Call Settings

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 1

STEP 2

STEP 3

STEP 4

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

To configure call forwarding:

Press the center Select button to view the available preferences.

Scroll to Call Settings and press the center Select button again.

Scroll to Call Forwarding and press the center Select button.

In one or more of the fields, enter the number to which you want to forward calls.

You can forward calls to a voice mailbox, another extension, or an outside line. If

forwarding calls to an outside line, be sure to enter any steering digits, access

codes, or area codes required to complete the call. Press the Delete key to

backspace.

•

Forward All Dest—Forwards all incoming calls to the destination of the

entered number.

•

Forward Busy Dest—Forwards incoming calls to the destination of the

entered number when your phone is busy.

•

Forward No Ans Dest—Forwards incoming calls to the destination of the

entered number when you do not answer the phone.

Press Save.

Choosing the Default Outgoing Line

You can configure the outgoing line for calls made from the Cisco SPA302D. For

example, you can select one of the ten DECT Lines or the PSTN (phone) line as the

outgoing line. The default outgoing line is the first line chosen when an outgoing

call is made from the Cisco SPA302D.

To choose the default outgoing line:

Press the center Select button to view the available preferences.

Scroll to Call Settings and press the Select button again.

Select Outgoing Default Line.

Choose the line you want to set as the default and press the Select softkey.