Ricoh Aficio 450 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka Ricoh Aficio 450. Ricoh Aficio 450 24 stron. Scanner reference option
Również dla Ricoh Aficio 450: Podręcznik (12 strony)

Drukuj stronę
Ricoh Aficio 450 Instrukcja obsługi
Preparation

Connecting to the Computer

The scanner unit uses SCSI-2 interface to connect to the computer.
1
Important
Do not daisy chain other SCSI devices with the scanner.
The scanner might not operate properly with some SCSI boards (installed in
the computer).
Since the scanner unit has a built-in terminator, no terminator needs to be
connected to the scanner. A terminator is only required at the other end of the
connection (i.e.,on the SCSI board in the personal computer).

Making the connection

A
Turn the computer off.
B
Make sure that none of the other functions are in use, and then turn off the
main power switch of the machine.
C
Connect the 50–pin half-pitch (pin type) end of the SCSI interface cable to
the SCSI connector on the machine.
D
Connect the other end of the SCSI interface cable to the computer.

Setting the SCSI ID

The SCSI ID for the scanner is initially set to "4". Normally, there is no need to
change this ID. If it is necessary to change this ID, follow the procedure bellow.
A
Turn the computer off.
B
Turn on your machine, and wait until "Ready" appears on the panel dis-
play of the machine.
4