Cisco Unified 7900 Series Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco Unified 7900 Series. Cisco Unified 7900 Series 11 stron. Release notes for firmware release 9.3(1)sr2
Również dla Cisco Unified 7900 Series: Instrukcja obsługi systemu (50 strony), Podręcznik rozwiązań (10 strony), Instrukcja obsługi systemu (36 strony), Informacje o wersji (20 strony)
![Cisco Unified 7900 Series Podręcznik użytkownika](/uploads/products/server2/537002/537002.jpg)
To Enable or Disable a Greeting:
Dial (2222) or press the Messages
Press 4 >1 >1.
After Cisco Unity plays your current greeting, press 2 to enable or disable your alternate
greeting.
NOTE: When your alternate greeting is enabled, it overrides all other greetings.
7.3 USING YOUR MAILBOX
To Check Messages:
Dial (2222) or press the Messages
Press 1 to hear new messages, or press 3 to review old messages.
Use the following keys to manage your messages and to control playback.
Use These Keys While Listening to a Message
1 = Restart Message
2 = Save
3 = Delete
5 = Change Volume
7 = Rewind, Small
8 = Pause or Resume
9 = Fast-forward to end
Use These Keys After Listening to a Message
1 = Replay Message
2 = Save
3 = Delete
4 = Reply
5 = Forward Message
6 = Save as Unheard
7 = Rewind, Small
9 = Play Message Summary
Cisco 7900 SeriesTelephones
Rollins College User Guide
(You can enable or disable only your alternate greeting.)
button and log on.
button and log on.
Page 8 of 11
To Send a Voice Message:
Dial (2222) or press the Messages
on.
Press 2.
Follow the Cisco Unity instructions to address the
message.
Press # to record the message, or press 1 to add
another name or list.
Press # to send the message, or press 1 for
message options.
Message Options
1 = Change addressing
2 = Change recording
3 = Set special delivery
4 = Review message
To Reply to a Message:
After listening to the message, press 4.
Record your reply.
Press # to send the reply, or press 1 for message options.
NOTE: Message Options are the same as above.
Follow the Cisco Unity instructions to handle the original
message.
button and log