Ricoh Pro C9200 Wskazówki - Strona 10

Przeglądaj online lub pobierz pdf Wskazówki dla Drukarka Ricoh Pro C9200. Ricoh Pro C9200 49 stron. Using the auto color diagnosis function
Również dla Ricoh Pro C9200: Instrukcja obsługi (48 strony), Instrukcja obsługi (24 strony), Szkolenie Cip (16 strony), Podręcznik (32 strony)

Drukuj stronę

RICOH Iro C9200 Series Tips on High Quality Irint

Feeding paper

To prevent multiple sheets from being fed at once, fan the paper before loading it. If you load

paper when only a few sheets of paper remain in the tray, multiple sheet feeding may occur.

Remove any remaining paper, stack them with the new sheets of paper, and then fan the entire

stack before loading it into the tray.

(1) Loosen the stack by riffling the sheets. Holding its shorter ends, flex the stack back and

forth to create space between the sheets. Repeat this several times. Fan the stack slowly

so that space can be created between the sheets.

(2) Make sure there is enough space between the sheets, hold the paper with both hands

and use a flat surface to align the long and short sides of the paper.

Cautions when setting paper to Vacuum Feed LCIT RT5120

When setting a paper to Vacuum Feed LCIT RT5120, adjust locations of side and end fences

according to the paper size. Good and bad examples of loading paper are described below. Follow

the "Good example".

Good example

①

Back of tray

Set a paper flush against the face plate.

②

Side fences

③

End fence

Adjust each fence little by little and align the side fence with

the width of the paper. Do not make the width too narrow that

causes "bending" or "wrinkle". Also, make sure that there is

no space between each fence and paper.

April.15, 2019