Ricoh Pro L5130 Quick Start Quide - Strona 13
Przeglądaj online lub pobierz pdf Quick Start Quide dla Drukarka Ricoh Pro L5130. Ricoh Pro L5130 32 stron. Additional function 2
Również dla Ricoh Pro L5130: Instrukcja ustawień zgrywania (44 strony), Podręcznik z informacjami dotyczącymi bezpieczeństwa (32 strony), Podręcznik (12 strony)
Drukuj stronę
CIP Training L5160/L5130
Additional Features
New Cut Position
3. Select the position from where to cut media from either [Sheet Exit Position], [Position
of the cutter] or [Base line position on the media guide].
4. Press [Cut].
Start cutting at the cut position that you set.
* When [Sheet Exit Position] is selected, media is automatically fed from sheet exit
position to the media cutter position (about 60mm length) before starting to cut.
-> Media is cut at the position indicated
* When [Position of the cutter] is selected, cutting start without media feeding.
-> Media is cut at the position indicated
* When [Base line position on the media guide] is selected, media is automatically fed
from "scissor mark" on the media guide to the media cutter position (about 630mm
length) before starting to cut.
-> Media is cut at the position indicated
5. Press [Set].
as red arrow
in following figure.
as blue arrow
in following figure.
as green arrow
in following figure.