Ricoh SP 111 SU Instrukcja szybkiej instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Drukarka Ricoh SP 111 SU. Ricoh SP 111 SU 2 stron.
Również dla Ricoh SP 111 SU: Instrukcja szybkiej instalacji (2 strony)

Drukuj stronę
Installing the Software
Using the Fax Function
and Reading the Manual
SP 110SF/111SF
Connection
1
2
CXP065
1. Port For External Telephone
2. Port For LINE
CXP066
Click [USB Quick Install].
CXP067
Click [Read PDF manuals].
CXP073
CXP074
Selecting the Telephone
Line Type
Press the [
] key.
CXP028
CXP036
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[Dial/Push Phone], and then press the
[OK] key.
Press the [▼] or [▲] keys to select the
telephone line type appropriate for
your telephone service, and then press
the [OK] key.
CXP169
Press the [ ] key to return to the initial
screen.
Selecting the Telephone
Network Connection Type
Press the [
] key.
CXP170
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[PSTN / PBX], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[PSTN] or [PBX], and then press the
[OK] key.
Press the [ ] key to return to the initial
screen.
Setting the Outside Line
Access Number
If you have selected PBX, use the following
procedure.
Press the [
] key.
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select [PBX
Access Number], and then press the
[OK] key.
Enter the outside line access number
using the number keys, and then press
the [OK] key.
Press the [
] key to return to
the initial screen.
Basic Operation for
Sending a Fax
Make sure that the fax mode screen is
displayed.
When the copier mode screen is displayed,
press the [
] key to switch to the fax
mode screen.
Place the original on the exposure glass
or in the ADF.
Enter the fax number using the number
keys.
Press the [
] key.
When you place original on the exposure glass
and Memory Transmission mode is enabled,
perform the following steps to scan the subse-
quent pages of the original.
Press the [1] key within 60 seconds,
place the next original on the exposure
glass, and then press the [OK] key.
Repeat this step until all originals are scanned.
Press the [2] key to start sending the
fax.
© 2013
EN CN
M178-8601A
Quick Installation Guide