Ricoh SP 202SF Instrukcja szybkiej instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Drukarka Ricoh SP 202SF. Ricoh SP 202SF 2 stron.
Również dla Ricoh SP 202SF: Instrukcja szybkiej instalacji (2 strony)
Installing the Driver for USB
Connection
and Reading the Manual
For details about specifying network settings,
see "Software Installation Guide".
CTT136
CTT137
1
2
CTT139
Using the Fax Function
SP 200SF/201SF/202SF Only
Connecting the Handset
CXP065
CTT143
CXP066
CTT052
CXP067
CTT064
CXP068
CTT078
CXP069
Selecting the Telephone
Connection
Line Type
Press the [
1
2
3
CTT093
1. Port For Handset
2. Port For External Telephone
Press the [▼] or [▲] keys to select [Fax
3. Port For LINE
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[Dial/Push Phone], and then press the
[OK] key.
Press the [▼] or [▲] keys to select the
telephone line type appropriate for
your telephone service, and then press
CTT071
the [OK] key.
Press the [
the initial screen.
Selecting the Telephone
Network Connection Type
Press the [
CTT144
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[PSTN / PBX], and then press the [OK]
key.
CTT097
Press the [▼] or [▲] keys to select
[PSTN] or [PBX], and then press the
[OK] key.
Press the [
the initial screen.
Setting the Outside Line
Access Number
If you have selected PBX, use the following
] key.
procedure.
Press the [
] key.
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
CTT006
Press the [▼] or [▲] keys to select [PBX
Access Number], and then press the
[OK] key.
Enter the outside line access number
using the number keys, and then press
the [OK] key.
Press the [
] key to return to
the initial screen.
Basic Operation for
Sending a Fax
] key to return to
Press the [
] key.
] key.
Place the original on the exposure glass
or in the ADF.
Enter the fax number using the number
keys.
Press the [
] key.
When you place original on the exposure glass
and Memory Transmission mode is enabled,
perform the following steps to scan the subse-
quent pages of the original.
Press the [1] key within 60 seconds,
place the next original on the exposure
glass, and then press the [OK] key.
] key to return to
Repeat this step until all originals are scanned.
Press the [2] key to start sending the
fax.
© 2013
EN CN
M133-8697
Quick Installation Guide
CTT102