Ricoh SP C262SFNw Instrukcja konfiguracji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Drukarka Ricoh SP C262SFNw. Ricoh SP C262SFNw 17 stron.
Drukuj stronę
- 1. Setup Guide
- 2. Setting up the Machine
- 3. Installing the Software
- 4. Check How the Computer Is Connected
- 5. Connecting the Machine (Usb/Network)
- 6. Connecting the Machine Via Wi-Fi
- 7. Fax Settings
- 8. Selecting the Telephone Line Type and Telephone Network Connection Type
- 9. Setting the Outside Line Access Number
- 10. Basic Operation for Sending a Fax
- 11. Scan Settings
- 12. Control Panel Sheet
2. Installing the Software
Check how the computer is connected
Specify how to connect to your computer according to the communication environment of your system.
Yes
No
connect using CD-ROM
Go to page 6 "Easy Setup
Using the CD-ROM".
• To connect using the WPS button, go to page 8 "Easy Setup Using the WPS Button".
• To connect using a PIN code, go to page 9 "Easy Setup Using a PIN Code".
• To set up manually, see User's Guide in the provided CD-ROM or our website.
• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct
communication among Wi-Fi Direct-compliant devices becomes possible.
When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.
Use the machine from a smart device
■ How to use the machine from a
smart device
From smart device applications, you can use the
following functions of the machine:
• Sending scanned images or documents from
the machine to the smart device
• Printing photographs and documents stored on
a smart device
After scanning the following QR code with
your smart device, search for the "RICOH SP
C260 series Scan" or "RICOH Smart Device
Connector" application and download either of
them from the site that appears.
Android
4
connect by wireless?
use router (access point)?
connect via Wi-Fi Direct
use computer?
See Wi-Fi Direct Guide in our website.
connect using Wi-Fi Setup Wizard
Go to page 7 "Easy Setup Using
the Wi-Fi Setup Wizard".
iOS
connect by
USB interface cable
Go to page 5 "Connecting the Machine (USB/Network)".
Android
iOS
■ How to use the NFC tag
(Android smart devices only)
1.
Configure the network connection of
the machine. For details, see page 6
"Connecting the Machine via Wi-Fi".
2.
After scanning the following QR code with
your smart device, search for the "RICOH SP
C260 series Scan" or "RICOH Smart Device
Connector" application and download either
of them from the site that appears.
3.
Start "RICOH SP C260 series Scan" or
"RICOH Smart Device Connector", and
write the machine's network information
on the NFC tag using the application.
4.
Perform printing by touching the NFC tag
from "RICOH Smart Device Connector" or
perform scanning from "RICOH SP C260
series Scan".
connect by wired?
connect by
Ethernet interface cable
DUE033
DUE035