Ricoh 77751 Instrukcja serwisowa - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Aparat cyfrowy Ricoh 77751. Ricoh 77751 13 stron.

PREPARATION

The following preparations are required before disassembling and assembling the camera.

1. Prepare the Jigs; tools and testers (Refer to the table of Jigs, tools and testers.)

2. Make the preparation for adjustment with referring [Preparation of Adjustments].

[Required equipment]

Programmed software for 77750(CD-ROM: 95901 P426)

Computer (PC)

OS: Windows XP SP2

Free disk space (HD): 500MB or more

SD card 6 pieces (16Mb or above) --- for FW

SD card reader or USB cable (I-USB17) --- For connecting with PC

1. Prepare SD card (6 pcs) for adjustment

*prepare SD card (6pcs) (Format with K-50 before use)

1. For repair FW (For replaced T100)

2. For product FW (Firmware: Latest version/running change version 1pcs each)

3. For test mode ON / OFF (For confirming full version, 1 pcs each)

4. For Initial set (Initialize / Product shipment)

2. Installing procedure of the Adjustment Software (Setting of the Computer)

*Set programmed software for 77750 (CD-R) to CD-ROM drive.

1. Copy the [77750] folder from the programmed software contained in the CD-ROM to [C: drive]

*Copy the following files from CD-RPM

2. Copy the file from [01_Replaced T100] folder to SD card --- For replaced main PCB FW (Firmware)

3. Copy the file from [02_GM_FW] folder to SD card --- For Product FW (Firmware)

4. Copy the file from [Test mode ON] and [Test mode OFF] folder in the [03_MODE SET] to each SD card.

(Since the name of all files is the same, you should distinguish them by name label etc.)

5. Copy the file from [Initialize Set] folder in the [03_MODE SET] to each SD card. --- For Initial set (Initialize)

CPU: 1GHz or more

Port: USB2.0

77750 - 2/12 -

RAM: 512MB or more

---1pcs

--- 2pcs

----2pcs

---1pcs