Ricoh AF-100 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Ricoh AF-100. Ricoh AF-100 11 stron.

press the Shutter Release Button in halfway. Then the Flash Unit pops up.

USING THE SELF-TIMER

* If you wish to clear the self-timer once it has started, close the Lens Shield.

* When using the self-timer with flash photography, put the Self-Timer Switch on after the Flash Ready Lamp is lit.

(When the surrounding light is not sufficient, the Flash Unit pops up immediately after the Self-Timer Switch is

activated.

* When using the self-timer with pre-focus shooting, measure the distance by pressing the Shutter Release Button

halfway. Without removing your finger from the Shutter Release Button, slide the Self-Timer Switch on, and self-

timer will operate. Pre-focus will be held automatically until the picture is taken.

PROPER CARE OF YOUR CAMERA

* If there is dirt on the lens or Distance Measuring Widows, do not touch with fingers. Use a blower to blow the dust

away, or wipe the surface gently with a soft cloth.

* Camera malfunction can be caused by shock, humidity, salt etc. After using the camera at the beach or places where

there are chemicals, wipe it carefully.

* Take care not to expose the camera to sudden changes in temperature, as they may cause condensation on the lens,

or other malfunctions.

* Do not expose the camera for a long period of time in extremely high temperatures, such as in your car or on the

beach, as this may ruin your film, or cause other malfunctions. (Fig. 31)

* When using a tripod, do not try to force a long screw into the socket. The screw length should be less than 5.7 mm

(1/4"). (Fig.. 32)

* Do not place the camera near equipment that has strong magnetic fields such as a television or radio. (Fig. 33)

(CLICK HERE TO SEE FIG. 26 - 27)

1. Slide the Self-Timer Switch fully in the direction of the arrow. (Fig. 26)

The Self-Timer LED on the camera blinks on and off. (Fig. 27)

Then, after about 8 seconds have elapsed, the LED will light steadily to indicate that the

shutter will release soon.

The shutter will be released about 10 seconds later since the self-timer has started.