Ricoh G700SE Instrukcja obsługi oprogramowania - Strona 37
Przeglądaj online lub pobierz pdf Instrukcja obsługi oprogramowania dla Aparat cyfrowy Ricoh G700SE. Ricoh G700SE 50 stron. Ricoh dynamic capture the ultimate imaging solution
Również dla Ricoh G700SE: Broszura i specyfikacje (6 strony), Broszura i specyfikacje (4 strony)
![Ricoh G700SE Instrukcja obsługi oprogramowania](/uploads/products/server2/5373210/5373210.png)
4.
Press MENU/OK to accept the new
memo.
The new memo will be recorded with the
next photograph taken.
To delete barcodes read with [Mode3]
selected for [Barcode Mode], highlight the
first item in the camera memo dialog and
press $ to display the description list. Press
! or " to highlight [No Setting] and press
MENU/OK.
Playback Mode
1.
Display a photograph.
Display a photograph to which you wish to
add barcode data.
2.
Press the ADJ./MEMO button.
The [Camera Memo] screen appears.
3.
Press the # button.
You can now read barcode data.
4.
Point the camera toward the
barcode you want to read and press
the # button.
The camera switches to macro mode and
reads the barcode data. When the camera
finishes reading the barcode, the data are
stored as a temporary description for the
first item in the memo.
Camera Memo
FileName/SAMPLE
Barcode
1234567890
Const.type
Foundation work
Location
Exterior
Supervisor
Beverly Beech
Affiliates
Gamma Company
If the camera is unable to read the barcode
or if you wish to exit without reading the
barcode, press $ or DISP. to return to the
camera memo dialog. Press # to read the
barcode again.
1/45
Ok
Non-ASCII characters in the barcode data
will be replaced by asterisks ("*").
5.
When [Barcode Mode] is set to
[Mode], you can repeat Step 4 and
read additional barcodes.
6.
Press the MENU/OK button to
confirm the camera memo.
7.
Press the MENU/OK button.
The memo will be added to the
photograph.
• You cannot read the same barcode more than
once.
• If, after reading the barcode, you shoot a
picture or change modes and then read
another barcode, the previously registered
barcode data is overwritten.
• If you edited the camera memo before reading
a barcode, the changes to the camera memo
are not retained if the camera is unable to
read the barcode. However, voice memos are
retained.
• You can edit the barcode data registered as a
temporary memo. (GP.31)
• The time available to read barcodes can be
selected using the [Scan Time] option in the
camera memo menu.