Ricoh A076-29 Biuletyn techniczny - Strona 24
Przeglądaj online lub pobierz pdf Biuletyn techniczny dla Copier Ricoh A076-29. Ricoh A076-29 38 stron.
Drukuj stronę
SUBJECT: Troubleshooting for the bent image and/or skewed images.
11. Install the paper feed unit as follows:
a) Secure the screw [L] while
pushing the rear side of the paper
feed unit to the manual feed side
as shown. Then, secure the other
screw [M].
b) Secure the screw [N] while
pushing the front side of the paper
feed unit to the drum unit side as
shown. Then, secure the other
screw [O].
NOTE:
When sliding the front side of
the paper feed unit to the drum
unit side, make sure that the
paper feed unit does not
overlap the screw [P] securing
the earth plate.
12. Reinstall all covers and units.
13. Check the copy quality. If the paper now skews in the opposite direction (front side of
copy paper feeds ahead), push the front side of the paper feed unit to the manual feed
side. Check & repeat the procedure until the skew is corrected.
Technical Bulletin
< Rear side of the paper feed unit>
[L]
< Front side of the paper feed unit>
[P]
Reissued on Dec. 15 '92
No. RTB-007
Manual
Feed side
Drum Unit
side
[N]
[O]
DATE: Oct. 15 '92
PAGE: 9 of 10
[M]