Cisco Unified IP Phone Expansion Module 7915 Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla Telefon IP Cisco Unified IP Phone Expansion Module 7915. Cisco Unified IP Phone Expansion Module 7915 27 stron. Unified ip phone and expansion module for unified communications manager express 4.3 and later versions
Również dla Cisco Unified IP Phone Expansion Module 7915: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
To install the Cisco Unified IP Phone Expansion Module 7915,
perform the following tasks.
1. Remove the Footstand from the Cisco Unified IP Phone.
2. Connect the Support Bar to the Cisco Unified IP Phone.
3. Connect the Expansion Module 7915 to the Support Bar.
4. Connect the Interface Cable.
5. Connect the Power Supply Unit.
6. Connect the Footstand.
7. Connect a Laptop Cable Lock (optional).
Refer to the detailed instructions and corresponding
illustrations that follow for each of these high-level tasks.
To ensure a successful installation, verify with your
Caution
system administrator that your phone is ready for
the Cisco Unified IP Phone Expansion
Module 7915 and that Cisco Unified
Communications Manager is installed and
configured for the Cisco Unified IP
Phone Expansion Module 7915. Make sure that
you have all of the parts that you need (see the
"Before You Begin" section on page 3).
Remove the Footstand from the Cisco Unified
IP Phone
Refer to Figure 2 and the steps that follow.
7