Cisco VoIP 9951 Podręcznik referencyjny - Strona 20

Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Telefon IP Cisco VoIP 9951. Cisco VoIP 9951 26 stron. Cisco voip phones

Camera Shutter Control

•

Open Camera Shutter: Spin the camera dial to the left. The shutter will now be open.

•

Close Camera Shutter: Spin the camera dial to the right. The shutter will now be closed.

By default, your camera will display video while on a call. To control your camera while on an active call,

please do the following:

1. While on an active call, press the Hide Video soft key to minimize the remote caller's video display on

your phone. Press the Show Video soft key to display the remote caller's video on your phone.

Video mute allows you to temporarily "mute" your video camera while leaving the end caller's video

enabled. When you mute your video, the end caller will see a black screen until you "unmute".

1. While on an active call, press the

muted, the icon will turn red. To remove video mute, press the

Adjust your phone screen brightness level.

1. Press the

(Applications) button.

2. Use the up/down buttons on the navigation pad to select Preferences. Click the Open button.

3. Select Brightness, then press the

– To increase brightness, press the "up arrow" on the Navigation pad.

– To decrease brightness, press the "down arrow" on the Navigation pad.

4. Press the Save soft key to set the brightness, or press the Cancel soft key to exit.

(Video Mute) soft key button on your phone. When video is

(Select) button on the navigation pad.

(Video mute) button again.