Ricoh G091 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do drukarek Ricoh G091. Ricoh G091 1 stron. Envelope feeder
Również dla Ricoh G091: Instrukcja instalacji (1 strony)

Drukuj stronę

1-bin Shift Sort Tray

Type 2600

For Machine Code: G056/G058/G073/G074/G091

INSTALLATION GUIDE

Important

If you attach the 1-bin Shift Sort Tray and the Paper Feed Unit, the Paper Feed Unit must be attached prior to attaching the 1-bin Shift Sort Tray.

The 1-bin Shift Sort Tray and the Mailbox cannot be attached to the printer at the same time.

Check the printer nameplate to confirm the model code.

Check the contents of the box for the following items:

Description

1-bin Shift Sort Tray

Upper Tray

Installation Guide (This sheet)

Confirm that the followings are true:

The power switch is turned off.

The interface cable is unplugged from the printer.

Remove the adhesive tapes and the packing material.

Remove the upper cover of the printer.

Note

The upper cover that is removed, is not used when installing

the 1-bin Shift Sort Tray.

Caution

Before installing options, the machine should be turned off and unplugged for at

(Code: G554)

least thirty minutes. Components inside the machine become very hot, and can

cause a burn injury if touched.

When lifting the machine, use the grips on both sides. The machine could break

or cause an injury if dropped.

It is dangerous to handle the plug with wet hands. Doing this may result in receiving

an electric shock.

Before moving the machine, unplug the power cord from the outlet. If the cord is

unplugged abruptly, it could become damaged. Damaged plugs or cords can

cause an electrical or fire hazard.

Q'ty

ZGDH170J

Holding the 1-bin Shift Sort Tray on both sides, align the

catches with the holes on the printer and insert.

Caution

When lifting the 1-bin Shift Sort Tray, hold it on both sides. Holding

underneath the 1-bin Shift Sort Tray may cause injury to the hands

if caught between the 1-bin Shift Sort Tray and the printer.

Slide the upper tray into the 1-bin Shift Sort Tray.

Attach the interface cable to the printer.

Plug the printer's power cord back into the wall

outlet and turn on the power switch.

Printed in Japan

ZGDX170J

ZGDX180J

G554-8600B