Ricoh PJ WX4153 Podręcznik z informacjami dotyczącymi bezpieczeństwa - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik z informacjami dotyczącymi bezpieczeństwa dla Projektor Ricoh PJ WX4153. Ricoh PJ WX4153 24 stron.

• To prevent fire or electric shock, disconnect the plug and the power cord from the wall outlet at

least once a year and check them. If any of the following conditions exist, do not use the plug

and the power cord continuously, and consult your dealer or service representative.

• There are burn marks on the plug

• The prongs on the plug are deformed

• The power cord's inner wires are exposed or broken

• The power cord's coating is cracked, dented, or damaged

• When the power cord is bent, the power turns off and on

• Part of the power cord becomes hot

• Do not use the connection cable if it is deformed, cracked, or damaged. Doing so could result

in fire or electric shock. If the connection cable is deformed, cracked, or damaged, contact

your service representative to request a replacement cable.

• Never user a power cord which appears damaged or frayed, or change the plug type on the

power cord.

• Push the power plug all the way into the power outlet. Do not use a power outlet with a loose

connection. Doing so may result in heat buildup. Plug the power cord in the correct direction

into the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock.

• If you do not use the machine for a long period of time such as consecutive holidays, be sure to

disconnect the power cord plug from the wall outlet for reasons of safety.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire

or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around

the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, disconnect the power cord from the wall outlet

for safety.

• Do not place the power cord and connection cable in a way that might cause someone to trip

and fall. The machine might fall over and cause an injury.

• Power Source

Safety Information