Ricoh PJ WX5140 Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Projektor Ricoh PJ WX5140. Ricoh PJ WX5140 18 stron.
Również dla Ricoh PJ WX5140: Specyfikacje (4 strony)

Drukuj stronę
An alert mail is sent when a cooling fan is stopped.
The body of the mail is "Fan Lock:xxx.xxx.xxx.xxx*"
Over Temperature
An alert mail is sent when internal temperature is too high.
The body of the mail is "Over Temperture:xxx.xxx.xxx.xxx*"
Lamp Hours Running Out
An alert mail is sent when lamp life is ending.
The body of the mail is "Lamp Hours Running out:xxx.xxx.xxx.xxx*"
Lamp Fail
An alert mail is sent when the projector fail to light the lamp.
The body of the mail is "Lamp Fail:xxx.xxx.xxx.xxx*"
* "xxx.xxx.xxx.xxx" means IP address of the projector. (ex. 192.168.0.100)
-Email test
Test Email is sent when click [Email Test].
Since no error will be reported even if any error is occurred in sending a test mail.
Check if the test mail is arrived to destination mail box.
The body of the mail is "Email Test:xxx.xxx.xxx.xxx"
"xxx.xxx.xxx.xxx" means IP address of the projector. (ex. 192.168.0.100)
<Note>
-Be sure Email settings and SMTP settings are correct.
-Email test is recommended after alert setting is set.
-Always set "Control method" to "LAN" in OSD menu in the projector to detect the error.
-Default value of Email setting is a sample setting as followings.
[Subject] Project alert
-Only SMTP protocol is supported.
11