Ricoh H321 Podręcznik wsparcia produktu - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik wsparcia produktu dla Faks Ricoh H321. Ricoh H321 12 stron. Laser ppf

Drukuj stronę

Product Configuration:

Standard Configuration:

H321

Installation Requirements:

Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Avoid areas exposed to sudden
temperature changes:
Make sure that this location does not present any ammonia nor any other organic gasses emission hazard.
Keep the machine away from any object that could obstruct its ventilation ports.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2")
Do not place the machine where it may be subject to strong vibrations.
Do not place the machine close to hangings or any other flammable objects.
Make sure that this location is dry, clean and dust free.
Choose a location where water and other splashes of liquid are limited.

Power Requirements:

Input voltage level:
AC110-127V/9A 50/60Hz
The socket-outlet shall be installed near the product
and shall be easily accessible.
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R (receptacle)
Page 3 of 11
Product Support Guide
H321
* Interface
USB 2.0 full speed
PSTN, G3
* Paper handling
Standard 250-sheet tray
1Sheet Bypass feed
* GDI Controller Function
* TWAIN color scanning (USB)
* Companion Suite/PaperPort PC software
10°C to 27°C(50-80°F) with an ambient humidity included between 15 to 80%
(up to 32°C(90°F) with an ambient humidity included between 15 to 54%)
Do not expose to direct sunlight
Choose a well ventilated location
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Final
Subject to change without notice