Cisco 12016 Instrukcja rozpakowywania Podręcznik - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja rozpakowywania Podręcznik dla Router sieciowy Cisco 12016. Cisco 12016 28 stron. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Również dla Cisco 12016: Arkusz danych (9 strony), Instrukcja obsługi (16 strony), Instrukcja wymiany (32 strony), Instrukcja wymiany (18 strony)
Drukuj stronę
Step 2
To remove the corrugated top cap from the shipping container, follow these steps:
a.
b.
c.
To remove the corrugated U-shaped side panels, follow these steps:
Step 3
a.
b.
c.
d.
e.
f.
Remove the two foam inserts from the top of the router.
Step 4
Step 5
Remove the corrugated, folded spacer from the top of the accessory package.
Step 6
Remove the accessory package from the pallet and set it away from the pallet.
Slide the top cap off the accessory package.
Step 7
Step 8
Remove each of the five accessory boxes and set them safely aside.
Note
Do not destroy the components of the shipping package. After installing the
router, reassemble and store one complete router shipping package so that you can
remove the router from the equipment rack and repackage the router in the event
it must be shipped to another site or—if necessary—returned to the factory.
78-16081-02
Cut the four straps that wrap around the sides of the container from top to
bottom.
Separate the top cap from the side panels and lift off the cap from the shipping
container.
Safely set aside the top cap.
At one of the narrow side panels containing the six plastic locking clips, insert
a finger into the hole in one of the plastic locking clips and pull the wedge
block out of the clip to release the butterfly tabs on the sides of the clip (see
the exploded detail of the plastic locking clip shown in
Grasp the clip and pull it out of the hole in the corrugated panel.
Repeat Step
a.
and Step
Repeat Step
a.
through Step
Lift the U-shaped side panel, pull it off the pallet, fold it flat, and set it safely
aside.
Repeat Step
e.
for the other U-shaped side panel.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
b.
for the other five clips on the narrow side panel.
c.
for the opposite narrow side panel.
Unpacking the Router
Figure
1.)
9