Cisco 12816 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Router sieciowy Cisco 12816. Cisco 12816 16 stron. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Również dla Cisco 12816: Instrukcja rozpakowywania Podręcznik (28 strony), Arkusz danych (9 strony), Instrukcja wymiany (32 strony), Instrukcja wymiany (18 strony)
Drukuj stronę
Using the Scissor-Jack Platform
Figure 5
Scissor-jack
Counter-clockwise
expands platform
Position the safety hand truck at one side of the router, slide the router and scissor-jack platform onto
Step 7
the safety hand truck, and secure the router to the hand truck with the locking safety strap.
Tilt the safety hand truck onto its outrigger wheels to move the chassis to a level, open space with a solid
Step 8
floor, where the chassis can be repackaged for shipping.
Moving a Router onto a Pallet
To reinstall the router and scissor-jack platform onto the shipping pallet, use
follow these steps:
Use the hand truck to move the chassis to a level, open space with a solid floor.
Step 1
Tilt the chassis upright so that it stands on the scissor-jack platform, then remove the hand truck.
Step 2
Use the bolts from the original shipping package to attach the eight hold-down brackets to the sides of
Step 3
the scissor-jack platform (two brackets on each side).
Note
Position the U-shaped pallet body behind the scissor-jack platform with the opening facing the back
Step 4
panel of the router.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions
8
Closing the Scissor-Jack Platform to Lower the Chassis
Front of chassis
screw
The hold-down brackets are not symmetrical: The bracket plate that fastens to the side of the
scissor-jack platform is narrower than the bracket plate that fastens to the top of the pallet, and
its bolt holes are smaller in diameter.
Chassis anchor
clip and bolt
(2 on each side)
Scissor-jack
platform
Clockwise
closes platform
Figure 6
as a reference and
78-15717-01