Cisco 1712 - Security Access Router Instrukcja instalacji sprzętu - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Router sieciowy Cisco 1712 - Security Access Router. Cisco 1712 - Security Access Router 21 stron. Security access routers
Również dla Cisco 1712 - Security Access Router: Skrócona instrukcja obsługi (13 strony), Arkusz danych (8 strony)
Drukuj stronę
Chapter 2
Installation
Connecting a PC to the Router's Console Port
Note
Step 1
OL-4050-02
If you want to configure the router by using the Cisco IOS command-line
interface, you must connect the router console port to a terminal or PC. The cable
and adapter required for this connection are included with the router.
To configure the router by using a PC, the PC must have some type of terminal
emulation software installed. The software should be configured with the
following parameters:
9600 baud
•
•
8 data bits
No parity bits
•
1 stop bit
•
Refer to the
Cisco 1700 Router Software Configuration Guide
information about configuring the router using Cisco IOS software.
To connect the Cisco 1711 or Cisco 1712 Security Access router to a terminal or
PC, follow these steps:
Connect the blue console cable to the blue console port on the back of the router,
as shown in
Figure 2-5 on page
Cisco 1711 and Cisco 1712 Security Access Routers Hardware Installation Guide
2-12.
Optional Installation Steps
for detailed
2-11