Epson EMP-51 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Projektor Epson EMP-51. Epson EMP-51 17 stron. Epson projectors quick reference guide
Również dla Epson EMP-51: Specyfikacje (1 strony)
Drukuj stronę
Tip
If a laptop computer or a computer with a
LCD screen has been connected to the
projector, you may need to change the
output destination for video signals
depending on the computer keys (the
symbols
and
are indicated
above the keys) or the computer's
settings. The output destination can
normally be changed by holding down the
computer's
key and pressing one of
the Function keys.
Once the source has been changed, after
a short wait the projector will start
projecting. If the output has been
changed to external output, only the
external output should be used.
For details, refer to the documentation
provided with your computer.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
After restarting the computer,
change the Control Panel
monitor and sound settings
so that Mirroring is active.
If images do not appear ...
Change the input signal.
Each time the
is pressed,
the video source cycles between
Computer/Component Video,
S-Video, and Video.
If you have other problems ...
Refer to the online
Help information.
Press
or
, and then
follow the instructions.
Projecting
Projector
Remote Control
Projector
Remote Control
* Refer to Troubleshooting.