Epson EMP-6100 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Epson EMP-6100. Epson EMP-6100 14 stron. Esc/vp21 command user's guide for business projectors
Również dla Epson EMP-6100: Specyfikacje (1 strony), Podręcznik użytkownika (25 strony), Podręcznik użytkownika (25 strony), Podręcznik użytkownika (28 strony), Podręcznik użytkownika (28 strony)

Drukuj stronę

Operating Environment

You can display status information on a computer screen for multiple

projectors that are connected to a network and also carry out batch operations

on all projectors such as turning the power on and off and changing the image

source. A maximum of 64 projectors can be monitored and controlled by batch

operations.

Projector A

Projector B

Projector C

System configuration example

TIP

If the projector's "Network Monitoring" or "Standby Mode"

configuration menu is set to "ON" or "Network ON", the projector

can still be monitored when it is in standby mode (when the

indicator is lit orange).

Turn on

projector B

EMP Monitor

(Power)

Compatible computers

* Macintosh computers cannot be used.

OS*

98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP

Professional

CPU

Pentium MMX 166 MHz or higher (Pentium II 233 MHz

or higher recommended)

Memory

64 MB or more (128 MB or more recommended)

capacity

Free hard disk

6 MB or more

space

Display

XGA (1024×768) or higher resolution, 16 bit or higher

display colour

Before starting operations

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed in the computer to be used for monitoring

and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000, NT4.0 or XP, the computer must be started up in

Administrator mode.

(When using EMP-81/61)

• To use EMP Monitor, an adapter and cable for conversion are required.

sUser's Guide "Standby mode"

• You need to make a setting for the adapter before connecting it to the

projector. sThe adapter's documentation

Refer to the "Appendices" for details about the adapter setting.

sp.12