Epson EMP-715 - XGA LCD Projector Informacje o produkcie - Strona 3

Przeglądaj online lub pobierz pdf Informacje o produkcie dla Projektor Epson EMP-715 - XGA LCD Projector. Epson EMP-715 - XGA LCD Projector 13 stron. Epson powerlite 505c: product information
Również dla Epson EMP-715 - XGA LCD Projector: Specyfikacje (3 strony)

Drukuj stronę

Computer Connector Pin Assignments

The Computer/Component video port is a female video RGB,
15-pin micro-D-style connector. The pin assignments are:
Input pin Computer connector signals
1
Red video
2
Green video
3
Blue video
4
Monitor (ID bit 2)
5
GND
6
Red video GND
7
Green video GND
8
Blue video GND
9
+5 V
10
Synchronous GND
11
Monitor (ID bit 0)
12
SDA
13
Horizontal sync
14
Vertical sync
15
Reserved
Projector Placement Guidelines
❏ Place the projector on a sturdy, level surface, between
3.6 and 45.5 feet from the screen.
❏ Make sure there is plenty of space for ventilation around and
under the projector.
❏ Make sure the projector is within 6 feet of a grounded
electrical outlet or extension cord. If you're using a computer
and/or video source, locate them within 5 feet of the
projector.
❏ Place the projector directly in front of the center of the
screen, facing it toward the screen squarely. Otherwise, your
image will not be square.
EPSON PowerLite 505c/715c Projector
The distance from the projector to the screen determines the
actual size of the projected image. Use the general guidelines
in the table below to determine the proper distance.
Image size
Horizontal distance from projector to
(diagonal)
screen
30 inches
3.6 to 4.3 feet (1.1 to 1.3 meters)
40 inches
4.8 to 5.8 feet (1.5 to 1.8 meters)
60 inches
7.4 to 8.9 feet (2.2 to 2.7 meters)
80 inches
9.9 to 11.9 feet (3.0 to 3.7 meters)
100 inches
12.4 to 15.0 feet (3.8 to 4.6 meters)
120 inches
15.0 to 17.7 (4.6 to 5.4 meters)
150 inches
18.7 feet to 22.6 (5.7 to 6.9 meters)
200 inches
25.0 to 30.2 feet (7.6 to 9.2 meters)
300 inches
37.6 to 45.5 feet (11.5 to 13.9 meters)

Starting Up the Projector

Follow these steps to start up the projector:
1. Connect one end of the power cord to the projector's power
inlet.
2. Connect the other end to a grounded electrical outlet.
The power light on top of the projector turns orange,
indicating that the projector is receiving power but not yet
turned on.
1/01
EPSON PowerLite 505c/715c Projector
power light
- 3