Setting Graphics and Movie Files Display Conditions and Operation Mode
You can set the display conditions and operation mode for when playing
back graphics or movie files as a slideshow in CardPlayer. The content for
display conditions that can be set is: Continuous Play, Screen switching
time, Display order, Effect, and Mode switching.
PROCEDURE
1
Tilt the [ ] button on the remote control to position
the cursor on the folder where display conditions are
to be set.
2
Press the following buttons on the remote control
depending on the operation mode in use.
Guide mode: Press the [Enter] button to display the Easy Menu.
Select "Options" on the menu, and press the [Enter]
button.
Quick mode: Press the [ESC] button to display the Easy Menu.
Select "Options" on the menu, and press the [Enter]
button.
3
Set each of the items.
Enable settings by positioning the cursor on the desired item and
pressing the [Enter] button on the remote control.
Details for of the items are given below.
Continuous
Indicates whether to perform the slideshow repetitively.
Play
Screen
After the time designated here has elapsed, the next file
switching time
is displayed. If "No" is selected, the slideshow will
proceed to the next file when either the [Enter] or [ ]
button is pressed on the remote control.
Display order
Sets the order of the files to be displayed.
Effect
This sets the effects to apply when displaying file
content.
Mode
Switches the operation mode in CardPlayer.
Switching
The initial setting is "Guide mode".
See "Easy Menu Operation (Guide Mode)" (s
for "Guide mode" operations.
See "Quick Mode Operation" (s
mode" operations.
EasyMP Operation Guide
26
p.18
)
p.19
) for "Quick
Drukuj stronę