Cisco 2801 - Integrated Services Router Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Router sieciowy Cisco 2801 - Integrated Services Router. Cisco 2801 - Integrated Services Router 29 stron. 2800 series integrated services routers
Również dla Cisco 2801 - Integrated Services Router: Arkusz danych (20 strony), Skrócona instrukcja obsługi (47 strony)
Drukuj stronę
The Cisco 2801 router features a console port, an auxiliary port, Universal Serial Bus (USB) port, two
high-speed WAN interface card (HWIC) slots, Voice interface card (VIC) slot, WIC/VIC slot, two10/100
Fast Ethernet RJ45 ports, and a Compact Flash (CF) drive. The Cisco 2801 router has two slots for
AIM-VPN/EPII-Plus cards
connections.
of 14 LEDs: two duplex LEDs, two speed LEDs, two link LEDs, two PVDM LEDs, two AIM LEDs,
system status LED (SYS OK), system activity (SYS ACT) LED, inline power LED, and CF LED. The
back panel has the power inlet and on/off switch.
The front panel contains the following:
(1) VIC slot
•
(2) HWIC/WIC/VIC slot 0
•
(3) WIC/VIC slot
•
(4) HWIC/WIC/VIC slot 1
•
(5) Console port
•
(6) FE ports
•
(7) System status and activity LEDs
•
(8) Inline power LED
•
(9) USB port
•
(10) FE LEDs
•
(11) Auxiliary port
•
(12) CF LED
•
(13) CF drive
•
The rear panel contains the following:
(1) Power inlet
•
(2) Power switch
•
(3) Ground connector
•
Table 5
Table 5
Name
System OK
Inline Power
System Activity
1. The security policy covers the configuration in which one AIM card is used.
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
OL-8719-01
1
, two internal packet voice data modules (PVDMs), and two fast Ethernet
Figure 4
and
Figure 5
provides more detailed information conveyed by the LEDs on the front panel of the router:
Cisco 2801 Front Panel Indicators
State
Solid Green
Blinking Green
Solid Green
Amber
Off
Solid Green
Blinking Green
Off
show the front and read panels of the router. The front panel consists
Description
Router has successfully booted up and the software is
functional.
Booting or in ROM monitor (ROMMON) mode.
Inline power supply is working properly.
Inline power failure.
Inline power supply is not present.
System is actively transferring packets.
System is servicing interrupts.
No interrupts or packet transfer occurring.
Cisco 1841 and Cisco 2801 Routers
7