Cisco 2811 Series Operacje - Strona 10
Przeglądaj online lub pobierz pdf Operacje dla Router sieciowy Cisco 2811 Series. Cisco 2811 Series 31 stron. 2800 series integrated services routers
Również dla Cisco 2811 Series: Arkusz danych (20 strony), Operacje (31 strony), Instalacja i aktualizacja (14 strony), Skrócona instrukcja obsługi (47 strony)
(4) USB ports
(5) CF drive
(6) LEDs described in table 1.
(7) Optional RPS input
The back panel contains the following:
(1) GE 0 port
(2) GE 1 port
(3) HWIC 0 slot
(4) HWIC 1 slot
(5) HWIC 2 slot
(6) HWIC 3 slot
(7) VeNoM slot
(8) ENM slot
(9) Ground connector
The following tables provide more detailed information conveyed by the LEDs on the front and
rear panel of the router:
Name
System Power
Auxiliary Power
Activity
Compact Flash
Name
PVDM2
PVDM1
PVDM0
AIM1
AIM0
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
State
Description
Off
Power off
Blinking Green
ROMMON mode
Solid Green
Operating normally
Solid Orange
System Error Detected
Off
-48V PS and RPS not present
Solid Green
-48V PS or RPS present and functional
Solid Orange
-48V PS or RPS present and failure detected
Off
No interrupts or packet transfer occurring
Blinking Green
System is servicing interrupts
Solid Green
System is actively transferring packets
Off
No ongoing accesses, eject permitted
Solid Green
Device is busy, do not eject
Table 5 – 2821 Front Panel Indicators
State
Description
Off
PVDM2 not installed
Solid Green
PVDM2 installed and initialized
Solid Orange
PVDM2 installed and initialized error
Off
PVDM1 not installed
Solid Green
PVDM1 installed and initialized
Solid Orange
PVDM1 installed and initialized error
Off
PVDM0 not installed
Solid Green
PVDM0 installed and initialized
Solid Orange
PVDM0 installed and initialized error
Off
AIM1 not installed
Solid Green
AIM1 installed and initialized
Solid Orange
AIM1 installed and initialized error
Off
AIM0 not installed
Solid Green
AIM0 installed and initialized
10