Cisco 3620 Skrócona instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Cisco 3620. Cisco 3620 37 stron. Rack-mount and wall-mount
Również dla Cisco 3620: Instrukcja obsługi (17 strony), Uwaga dotycząca konfiguracji (18 strony)

Drukuj stronę

1. Perform Initial Configuration

Figure 8

Cisco 3640 Center-Mount Bracket Attachment (Requires Optional NEBS/ETSI Kit)

1 2 3

ACTI VE

READ Y

Note: The second bracket attaches to the other side of the chassis.

Installing Chassis in Rack

Install the chassis in the rack, using the screws provided with the rack. Rack-mounting screws are not provided with the router.

Use two screws for each side.

Wall-Mounting the Cisco 3620 Chassis

Attaching Rubber Feet

If you are mounting a Cisco 3620 on a wall, you must install the rubber feet that are supplied in the accessory kit. They provide

a space for air circulation. Peel the rubber feet from the adhesive strip, and attach one foot at each corner to the bottom of the

chassis. Cisco 3640 routers are not suitable for wall-mounting.

Attaching Brackets

Attach the brackets to the chassis as shown in Figure 9, using the slotted hex-head screws and plastic spacers (supplied in the

accessory kit). Orient each spacer so that the shoulder fits into the slot in the bracket. Attach the second bracket to the opposite

side of the chassis.

Figure 9

Attaching the Brackets for Wall-Mounting a Cisco 3620 Router

ACTI VE

READ Y

Note: The second bracket attaches to the other side of the chassis.

Attaching to Wall

Attach the chassis to the wall:

• Position the end nearest the power cable at the top.

• Align the screws (not included) with a wall stud, or use wall anchors.

PCM CIA