Epson EMP-TW100 Instrukcja konfiguracji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Projektor Epson EMP-TW100. Epson EMP-TW100 10 stron. Home theatre projector
Również dla Epson EMP-TW100: Broszura i specyfikacje (24 strony), Podręcznik użytkownika (9 strony), Instrukcja konfiguracji (12 strony)

The projector supports the following five projection methods, allowing you to choose the

best method for displaying your images.

After setting up the projector, refer to the User's Guide for details on turning on the power

and adjusting settings such as the screen size. ( "Basic Operations" in User's Guide)

Be sure to read the separate Safety Instructions/ World-Wide Warranty

Terms before setting up the projector.

Front projection

Front/ceiling projection

* A special method of installation is required in order to suspend the projector from the ceiling. Please

contact the place of purchase if you would like to use this installation method.

* When installing to the ceiling or projecting from behind the screen, set the Projection command in the

Settings environment setting menu to match the method of projection being used.

(

Settings

menu in User's Guide)

Setting-up Methods

Rear projection using a

translucent screen

Rubber stands

(Attach in

3 places)

Projecting from locations such as the

top of a cabinet with the projector

turned upside-down

When installing the projector upside down, set

the Projection command in the Settings

environment setting menu to "Front/Ceiling".

("Settings" menu in User's Guide)

Rear projection onto a

translucent screen with the

projector installed to the ceiling

When turning the projector upside

down, attach the rubber stands that

are included.

This can prevent the control panel

from directly touching the

installation surface.