Epson EX3240 Szybka konfiguracja - Strona 2
Przeglądaj online lub pobierz pdf Szybka konfiguracja dla Projektor Epson EX3240. Epson EX3240 4 stron.
Drukuj stronę
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
can display a QR code, switch between projection sources, and quickly
access various adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
your language and press
system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
EX7240 Pro: To reduce or enlarge the image, turn the zoom ring.
EX3240: To reduce or enlarge the image, press the Tele (reduce) or Wide
(enlarge) buttons on the projector.
EX7240 Pro
EX3240
4
Turn the focus ring to sharpen the image.
EX7240 Pro
EX3240
5
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
EX7240 Pro
EX3240
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
to select it. You
. Select Language and press
. Press the Menu button to exit the menu
or
, you may have placed the projector
or
button on the projector to
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
. Select
Access projector
Turn off projector
For more information on using the remote control, see the online User's
Guide.
Project wirelessly
Follow the steps here to connect the projector over a wireless network. With
the EX3240, you will need the optional wireless LAN module (part number
V12H731P02).
If you're projecting from a computer, it must have a wireless card or built-in
wireless interface, and be running Windows 8, Windows 7, Windows Vista
Windows XP Professional x64, or Windows XP, or OS X 10.5.8 to 10.10.x.
Note: If you're using the optional Quick Wireless Connection USB key
(Windows only, part number V12H005M09), press the LAN button on the
remote control. When you see SSID and IP address information on the screen,
connect the key to the projector's USB-A port. Look for the displayed message,
remove the key, and connect it to a USB port on your computer. Follow the
on-screen instructions on your computer to install the driver. For details, see
the online User's Guide.
1
Press the Menu button on the remote control, select the Network
menu, and press
2
Choose Network Configuration and press
3
Select the Wireless LAN menu and press
or
,
on and off
menus
display
.
Choose which source
to display
Navigate projector
menus
Get solutions to
common problems
,
®
.
.