Epson EX9230 Szybka konfiguracja - Strona 2

Przeglądaj online lub pobierz pdf Szybka konfiguracja dla Projektor Epson EX9230. Epson EX9230 4 stron.

Drukuj stronę

Adjust the image

If you don't see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

To reduce or enlarge the image, turn the zoom ring.

To sharpen the image, turn the focus ring.

If your image looks like

off to one side of the screen at an angle. Place the projector directly in

front of the center of the screen, facing the screen squarely. If you can't

move the projector, use the horizontal keystone slider on the projector to

correct the image shape.

Your projector automatically adjusts an image that looks like

but if necessary you can press the

correct it.

Using the remote control

Install the batteries as shown (two AA batteries).

Turn projector

on and off

Access projector

menus

Turn off projector

display

For more information on using the remote control, see the online User's Guide.

, you may have placed the projector

button on the projector to

Choose which source

to display

Navigate projector

menus

Access the Home

screen

Setting up a wireless

connection

Follow these steps to set up the projector for a wireless network connection.

To project wirelessly, you need to install the optional wireless LAN module for

the EX9230 (part number V12H005A02).

Note: You do not need the wireless LAN module for the Pro EX9240 because

the wireless functionality is built-in. Skip to "Select wireless network settings."

Install the optional wireless LAN module (EX9230)

Remove the wireless LAN module cover screw.

Insert the wireless LAN module into the USB-A port.

Attach the included wireless LAN module cover and secure it using the

screw you removed.

Note: The light on the wireless LAN module turns on when the module is

installed and operating. The light flashes when the module is communicating

over the network.

Select wireless network settings

Press the Menu button on the remote control.

Select the Network menu and press

Select On as the Wireless LAN Power setting.

Select Network Configuration and press