Epson PowerLite Home Cinema 3010 Szybka konfiguracja

Przeglądaj online lub pobierz pdf Szybka konfiguracja dla Projektor Epson PowerLite Home Cinema 3010. Epson PowerLite Home Cinema 3010 4 stron. Home theater projector
Również dla Epson PowerLite Home Cinema 3010: Broszura i specyfikacje (4 strony)

Drukuj stronę

PowerLite

Home Cinema 3010/3010e

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User's Guide.

Choose a location

Keep the projector level and place it at a height where its lens is centered

between the top and bottom of the screen. If this isn't possible, use the

horizontal keystone slider and keystone correction buttons to reposition the

image (see "Adjust the image").

In order to view 3D images correctly, 3D glasses must be worn within proper

range of the projector. Use the image below to determine the ideal distance for

3D projection (the shading represents the 3D viewing area):

60º

Use the optional external 3D emitter if the projector is located over

16.5 feet (5 m) from the viewing area. See "Optional accessories" on the back

of this sheet for ordering information, and the online User's Guide for more

information on where to place your projector.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Video Device

Connect up to 5 video devices and use the Source buttons on the projector or

remote control to switch between them.

*412153700*

16.5 ft (5 m)

13 ft (4 m)

HDMI cable

RCA Video cable

Audio cable

Component video cable

Audio cable

Computer

Monitor Port

Connect one end of a VGA cable to the projector's PC port, and the other end

to your computer's

monitor port. If you are using a laptop, switch it to

external display (see "Troubleshooting"). You can also connect an audio cable.

HDMI Port

Connect one end of an HDMI cable to the projector's HDMI port and the other

end to an HDMI port on your computer.

Camera or USB Device

Connect a digital camera, USB flash drive, or USB storage device to the

projector's

USB port.

If you connect a digital camera, USB flash drive, or USB storage device, you can

use the projector's Slideshow feature to project images. See the online User's

Guide for details.

Turn on your equipment

Turn on your video source or computer.

Plug in the projector. The

Remove the lens cap.

Press the

power button on the projector or On button on the remote

control. The power light flashes blue, and then stays on.

Note: To shut down the projector, press the

projector twice or the Standby button on the remote control, then

unplug it. You don't have to wait for the projector to cool down.

The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select Extended

and press Enter. Select Language and press Enter. Select your language

and press Enter. Press the Menu button to exit the menu system.

HDMI cable

VGA cable

power button on the projector turns blue.

power button on the