Samsung 20S1 Instrukcja obsługi dla właściciela - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla właściciela dla TV Samsung 20S1. Samsung 20S1 36 stron. Samsung cb21k22: user guide
Również dla Samsung 20S1: Instrukcja obsługi dla właściciela (32 strony), Instrukcja obsługi dla właściciela (32 strony)

Drukuj stronę
ENG
Plug & Play
Ant. Input Check
Auto Store
P 1
471 MHz
Exit
Time
Time
Clock
Clock
Move
ENJOY YOUR WATCHING
Enjoy Your Watching...
Language : English
Time
Plug & Play
Blue Screen
Child Lock
Low Noise AMP
Select
Enter
Plug & Play Feature
Exit
48 %
- - : - -
AM
11 : 35
Exit
Function
: Off
: Off
Exit
10
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER
on the remote control.
Result:
The message "Plug & Play" is displayed. It flickers for a
little while and then the "Language" menu is automatically
displayed.
Press the L or M button to select required language. Press the
2
MENU button to enter the language, and then the message "Ant.
Input Check" is displayed.
➣
If any language is not selected on the "Language" menu, the
"Language" menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
+
–
the
or
button to store the channels (refer to "Storing the
Channels Automatically" on page 12).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the "Time" menu is
displayed.
5
+
–
Press the
or
button to move to the hour or minute. Set the hour
or minute by pressing the L or M button (refer to "Setting and
Displaying the Current Time" on page 23).
6
When you have finished, press the MENU button.
Result:
The message "ENJOY YOUR WATCHING" is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the MENU button.
Press the L or M button to select the "Function", and then
2
+
–
press the
or
Select the "Plug & Play" by pressing the L or M button, and
3
+
then press the
Result:
The message "Plug & Play" is displayed.
button.
–
or
button.
button