Cisco Linksys SGE2010P Uwaga dotycząca wydania - Strona 2
Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Router sieciowy Cisco Linksys SGE2010P. Cisco Linksys SGE2010P 3 stron. Linksys sge2010: release note
Również dla Cisco Linksys SGE2010P: Arkusz danych (5 strony), Instrukcja aktualizacji oprogramowania sprzętowego (5 strony)
Drukuj stronę
New and Changed Information
Limitations and Restrictions
Release Notes for SGE2010/2010P
Firmware versions 3.0.0. 1 7
•
Supports new GUI style
•
Uses "admin" as the default user name, and "admin" as the default password.
•
Uses enterprises(1),cisco(9).otherEnterprises(6).ciscosb(1) as the MIB root
OID for private MIB(s)
•
Devices that are upgraded or factory loaded with phase 3 firmware version
3.0.0. 1 7 cannot be downgraded to earlier versions of the firmware and boot
code.
•
Devices running phase 1 firmware (1.0.x.y) can be upgraded to firmware
version 3.0.0. 1 7 using the Easy Upgrade Utility.
•
Devices running phase 2 firmware (2.0.x.y) can be upgraded to firmware
version 3.0.0. 1 7 using regular upgrade procedures. When upgrading, both
firmware images must be upgraded.
•
Mixing the stack of devices running phase 3, phase 2, and/or phase 1
firmware are not supported.
•
Devices running phase 1 and phase 2 firmware must be upgraded
separately before stacking with phase 3 devices.
•
When browsing using Internet Explorer 8, some ports in the ZOOM web
page might flash for a second and not be presented properly. Refreshing
the ZOOM web page or moving to another web page and back will resolve
this issue.
•
If a device is configured to advertise its services using Bonjour, its System
Name must contain only upper case characters 'A' to 'Z', lower case
characters 'a' to 'z', numbers 0 to 9, and the character '-'.
•
Changing the default HTTP service port number (80) will make the Bonjour
service _csco-sb on the switch inaccessible
Release Notes
2