CAAS Audio E100 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz CAAS Audio E100. CAAS Audio E100 11 stron. Mono-block amplifier

Important Safety Instructions

1. PLEASE READ THESE INSTRUCTIONS CAREFULLY.

2. Keep these instructions safe, heed all warnings and follow all instructions.

3. To reduce the risks of electric shock please do not remove the cover, there are no user serviceable parts

inside.

4. Do not use this equipment near water and take care not to let objects or liquids fall into the product.

5. Clean only with a dry cloth.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that

produce heat.

Do not operate the amplifier in ambient temperatures below 0

8. If you are using a cart or stand please make sure you adhere to CAAS Audio's minimum recommended

ventilation (see below in the getting started section).

9. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions (see

below in the getting started section).

10. This appliance should be earthed so only use it with the CAAS supplied power cord. Never operate

without an earth connection.

11. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

12. A mains lead or plug with an exposed conductor is dangerous so if this is seen, please dispose of

immediately.

13. The Elysian 100 is protected by a 3.15A slow blow fuse situated in the rear mains inlet panel just above

the inlet socket. Replace only with the same specification fuse (3.15A slow blow)

14. When switching the unit off at the main socket or rear mains inlet switch, do not turn the unit back on for

at least 1 minute. Rapid switching on and off may result in the blowing of the protection fuse.

15. Only use attachments/accessories specified by the manufacturer.

16. Unplug this apparatus during lightning storms or when unused for long periods of time.

17. Refer all servicing to qualified service personnel.

18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

19. Only connect cables (speaker and/or input) when the amplifier is powered off at the mains. Never

connect & disconnect cables while the amplifier is turned on.

20. The amplifier has no output protection as these circuits can degrade the amplifiers performance. Do not

short the speaker terminal as this could damage the amplifier.

21. The amplifier has no input overload protection as these circuits can degrade the overall amplifier

performance. Take care when connecting input cables and only do so while the amplifier is powered off.

22. The amplifier is fitted with over-temperature protection. The amplifier should never operate at over 60

however thermal shut off protection will disconnect the amplifier from the mains supply should the

temperature rise above 70

before it will reset. Ventilation requirements must then be checked.

C. If this happens you will need to wait for the amplifier to cool to below 55

C or above +35