CAB AXON 2 Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Urządzenie do tworzenia etykiet CAB AXON 2. CAB AXON 2 18 stron. Tube applicator

Mounting

Attention!

 Disconnect the printer from the electrical outlet before

mounting or removing the applicator.

2.1

 Loosen screw (2) and remove cover (1).

2.2

 Turn the roller bearing (3) with the 2.5 mm Allen key out of the side plate

(4).

 Pull the original print roller (6) from the shaft (1) through the side plate (4).

 Insert the new roller (2) and slide it onto the shaft(1). Turn the roller slightly

until the hexagonal shaft engages the hexagonal socket of the roller.

 Put the roller bearing (3) onto the axle of the roller and screw it into the

side plate (4).