Cisco NCS 6008 Instrukcja rozpakowywania, przenoszenia i zabezpieczania - Strona 29
Przeglądaj online lub pobierz pdf Instrukcja rozpakowywania, przenoszenia i zabezpieczania dla Router sieciowy Cisco NCS 6008. Cisco NCS 6008 44 stron. 6000 series network convergence system routers unpacking, moving, and securing guide
Również dla Cisco NCS 6008: Podręcznik (12 strony)
Drukuj stronę
Chapter 2
The brackets are labeled as left or right (viewed from the front and rear).
Note
Figure 2-8
1
1
From left to right—left front and right
front lift brackets
2
Side pins on each lift bracket (inserted into
the chassis)
3
From left to right—Right rear and left rear
lift brackets
4
Eight M14 x 30 mm socket-head cap
screws (used to bolt the front and rear lift
brackets to the dolly)
5
Four M10 x 25 mm socket-head cap screws
(used to bolt the front and rear lift brackets
to the chassis)
Attach lift brackets to the chassis using the M10 x 25 mm screws
Step 4
pins of the lift bracket to the lower left side of the front side of the chassis. Repeat this step with the right
lift bracket on the lower right side of the front side of the chassis.
attaching the lift brackets to the chassis.
OL-29233-01
Lift Brackets and Bolts
2
7
5
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
Attaching the Dolly to the Chassis and Removing the Chassis Pallet
6
8
3
2
2
9
1
4
6
Hole for M10 x 25 mm socket-head cap screw
7
Left front
8
Right rear
9
Right front
10 Left rear
10
6
2
6
(Figure
2-8). Align and insert the side
Figure 2-9
shows the oblique view of
3
2-9