Cisco Network Convergence System 6000 Series Instrukcja rozpakowywania, przenoszenia i zabezpieczania - Strona 39
Przeglądaj online lub pobierz pdf Instrukcja rozpakowywania, przenoszenia i zabezpieczania dla Router sieciowy Cisco Network Convergence System 6000 Series. Cisco Network Convergence System 6000 Series 44 stron. 6000 series network convergence system routers unpacking, moving, and securing guide
Drukuj stronę
Chapter 3
Figure 3-2
without using the dolly supplied by Cisco. This space is exclusive of both the PDU brackets (mounted
on both sides), and the router cosmetics.
Figure 3-2
1
2
3
Moving the Unpacked Chassis
Prerequisites
Before performing this task, make sure that the dolly is in the correct configuration, is firmly attached
to the unpacked chassis, and the dolly brakes are in the locked position.
If a dolly configuration change is required, see the
Note
page
OL-29233-01
is a top view of the minimum aisle space required to install the Cisco NCS 6008 chassis
Minimum Aisle Space Requirements to Install the Cisco NCS 6008 Chassis—Top View
(With Dolly Removed)
5
Existing Cisco
NCS 6008 Chassis
Chassis front
Chassis side
Moving space requirement: 34.7 in. (95 cm)
1-11.
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
1
4
4
Chassis rear
5
Chassis side
"Modifying the Dolly Configuration" section on
Moving the Unpacked Chassis
2
3
Existing Cisco
NCS 6008 Chassis
3-5