CAB WICON SQUIX Instrukcja serwisowa - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Urządzenia przemysłowe CAB WICON SQUIX. CAB WICON SQUIX 18 stron. Wrap-around applicator

Replacing Assembly Units

3.6

Replacing the Cam Plate and the Locking Lever

Fig. 11

Replacing the cam plate

 Remove covers and centering panels.

 Loosen two screws (8) and remove the plate (7).

 Loosen two screws (1) and pull the winder plate (4) with the cam plate (3) and the transport module (6) out of the

housing.

 Pull the cam plate (3) from the pins (5).

 Set the new cam plate onto the pins (5).

Fig. 12

Replacing the locking lever

 Pull the locking lever (10) from the pin (9).

 Mount the new locking lever.

 Push the winder plate (4) with the cam plate (3) and the transport module (4) into the housing and mount the

winder plate with two screws to the gear wheel (2).

 Mount the plate (7).

 Mount the centering panels and the covers.