CAB 4114L-300 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka CAB 4114L-300. CAB 4114L-300 13 stron. Stroke applicator

Drukuj stronę
CAB 4114L-300 Instrukcja obsługi
2

Product Description

6
2.1

Important Features

•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by an air pressure impulse at the end of
each application.
•
For operation in a system the I/O interface of the printer can be used.
2.2

Technical Data

Label transfer method
Label width in mm for Hermes + 2
Label height in mm for Hermes + 2
Compressed air pressure
Sound pressure level
Product during
labeling
Labeling onto the
product
Product height
Product distance to lower edge
at cylinder stroke
Immersion depth pad F
Cycle time about frequency/min.
Label transfer method
Label width in mm for Hermes + 2
Label height in mm
Compressed air pressure
Sound pressure level
Product during
labeling
Labeling onto the
product
Product height
Product distance to lower edge
at cylinder stroke
Immersion depth pad F
Cycle time about frequency/min.
Table 1
Technical Data
1)
Determined at 100 mm stroke below device / smallest label height / print speed 100 mm/s.
2)
Immersion depth at applicator >25 mm, the cover of the Hermes + must be modified.
Tamp pad
4114/16 L/R 11 F 4114/16 L/R 12 F
4 - 58
for Hermes + 4
10 - 114
for Hermes + 6
50 - 174
4 - 80
for Hermes + 4
8 - 80
for Hermes + 6
8 - 80
fixed
in motion
from the top
from below
sideways
fixed
variable
200 mm up to mm
135
300 mm up to mm
235
400 mm up to mm
335
2)
up to mm
100
1)
for Hermes + 4
for Hermes + 6
fixed
in motion
from the top
from below
sideways
variable
200 mm up to mm
300 mm up to mm
400 mm up to mm
2)
up to mm
1)
Tamp pad
with foam
10 - 58
10 - 114
50 - 174
8 - 80
8 - 80
8 - 80
0,45 MPa (4,5 bar)
under 74 dB(A)
¢
¢
-
-
¢
¢
¢
¢
¢
¢
-
-
¢
¢
135
235
335
100
30
30
Silicon pad
4114/16 L/R 8800 F
10 - 58
10 - 114
50 - 174
8 - 80
0,45 MPa (4,5 bar)
under 74 dB(A)
¢
¢
¢
¢
¢
135
235
335
100
30
Tamp pad
Blow pad
with label stop
4114/16 L/R 61 F
4014 L/R 2100
10 - 58
10 - 58
10 - 114
10 - 114
50 - 174
-
4 - 80
10 - 80
8 - 80
10 - 80
8 - 80
-
¢
¢
-
-
¢
¢
¢
¢
¢
¢
¢
-
¢
-
135
140
235
240
335
340
100
-
30
30
-
6