CAB CSQ 401 Instrukcja montażu - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Przecinak CAB CSQ 401. CAB CSQ 401 20 stron.

Maintenance

5.4

Calibrating the cutter

Attention!

After every blade change and removal and installation of the blades

for cleaning, the blades must be calibrated!

 Remove label material.

 Start menu.

 Select

 Press Continue to start the calibration process.

After a cutter movement the display shows Device successfully calibrated.

If the calibration failed an error message will appear.

 Select Continue.

Setup >

Cutting

Calibrate device.