Cab Technology 5948102 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do drukarek Cab Technology 5948102. Cab Technology 5948102 10 stron. External rewinder
Drukuj stronę
3
Installation
6
3.1
Unpacking
Check rewinder for damage which may have occurred during transport.
Check delivery for completeness.
Contents of delivery:
•
External Rewinder
•
2 Adapters
•
Plate
•
Clamp
•
Operator's Manual
i
Note!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
Set up label printers only in dry locations protected from splash water.
3.2
Mounting the Rewinder to the Printer
!
Attention!
Risk of damage !
Switch off the printer before mounting or removing the rewinder.
1
2
3
Figure 2
Mounting the rewinder
1. Loosen screw (2).
2. Remove front cover (1).
3. Insert the pin (5) of the rewinder into the hole (6) of the printer.
4. Press the rewinder against the printer. That way the plug (4) of the rewinder will be connected to the peripheral
port (7) of the printer.
5. Secure the rewinder by tightening the spindle (3).
3
4
5
3
5
6
7
6