Cab Technology ER3 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do drukarek Cab Technology ER3. Cab Technology ER3 10 stron. External rewinder
Drukuj stronę
4
1
Introduction
1.3
Safety Instructions
Caution!
!
Risk of injury by rotating parts!
During operation, rotating parts are freely accessible.
Ensure that people's clothing, hair, jewelry etc. do not come into contact with the exposed rotating
parts.
!
Attention!
Risk of damage !
Switch off the printer before mounting or removing the rewinder.
!
Attention!
Risk of damage !
Do not change the rewinding direction, when the rewind axle is turning.
•
The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).
•
Do not use the device in an explosive atmosphere.
•
Do not use the device close to high-voltage power lines.
•
Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or service technicians.
•
Unauthorized interference with electronic modules or their software can cause malfunctions.
Other unauthorized work on or modifications to the device can also endanger operational safety.
•
Always have service work done in a qualified workshop, where the personnel have the technical knowledge and
•
tools required to do the necessary work.
•
The maximum sound pressure level is less than 70 dB(A).
Warning!
!
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
1.4
Environment
Obsolete devices contain valuable recyclable materials that should be sent for recycling.
Send to suitable collection points, separately from residual waste.
Send the parts for recycling.
4