Cisco Unified Communications Manager 8.5(1) Skrócona instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Cisco Unified Communications Manager 8.5(1). Cisco Unified Communications Manager 8.5(1) 20 stron. 850 series and 870 series access routers cabling and setup
Również dla Cisco Unified Communications Manager 8.5(1): Arkusz danych (8 strony)
Drukuj stronę
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
Figure 1-6
Typical Installation of a Cisco 851 or Cisco 871 Router
1
LEFT
0
1X
2X
1X
2X
1
1 Ethernet connection to an external switch
2 Ethernet connection to a PC
3 WAN connection using a broadband modem to
the Internet
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
1-12
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
SN: XXXNNNNXXXX
LAN
FE0
4
FE1
3
FE2
2
FE3
1
1
2
Cisco 871W
WAN
CONSOLE
RESET
AUX
FE4
3
4
Internet
Internet
4 Console port
5 Power adapter
RIGHT / PRIMARY
+5,+12 VDC
5
78-16262-04