Cab Technology PCU Series Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przecinak Cab Technology PCU Series. Cab Technology PCU Series 20 stron. Perforation cutter

12
5
Operation
!
Attention!
In several label software solutions the perforation command C p
is not implemented. Perforating material via such a software is not
possible.
 For direct programming use the following command :
O Cn n...Value between 0.0 and 10.0
i
Notice!
If the label software has no setting for the cutting depth, i.e. O Cn is
not implemented, the adjustment also may be done using the printer
setup  chapter 3.
All labels in a print job will be printed without stopping and be perforated or cut
as chosen in the software : after each label, after a specific quantity of labels,
or at the end of a print job.

5.2 Operation Without Cover Plates

Due to the most varied materials it can come in rare cases to transportation
problems of the material depend of the cover plates.
It's possible to clear this problem with dismounting the cover plates.
Warning!
!
Risk of injury!
 If the cover plates for a better performance should be removed,
appropriate compensating measures are to be arranged for the
guarantee of security!
i
Notice!
In case the material do adhere in follow of electrostatic charge it's
possible to use a discharge brush for the printer by cab.
12