Cisco WS-X3011 Uwaga dotycząca konfiguracji - Strona 17

Przeglądaj online lub pobierz pdf Uwaga dotycząca konfiguracji dla Router sieciowy Cisco WS-X3011. Cisco WS-X3011 46 stron.

The default parameters for the internal console port on the router card are 9600

Note

baud, 8 data bits, no parity, and 1 stop bit. This default baud rate matches the switch

console baud rate. Do not change the default baud rate. If it has been changed, press

Ctrl-B to toggle through the available baud rates to restore the default.

Although the router card CLI is based on the Cisco IOS CLI, pressing Ctrl-B does not

function as a backspace key as it normally does in the Cisco IOS CLI; instead, it is used

to change the console baud rate.

Power ON the switch. The switch Greeting screen appears (Figure 8).

Step 2

Access the router card CLI by pressing Ctrl-R from the switch Main menu.

Step 3

You can toggle back and forth between the two CLIs by pressing Ctrl-R.

Note

Access the Router Card Command-Line Interface

Router Card (WS-X3011) Configuration Note