Cisco 2800 Series Konfiguracja

Przeglądaj online lub pobierz pdf Konfiguracja dla Bezprzewodowy punkt dostępowy Cisco 2800 Series. Cisco 2800 Series 10 stron. Cisco ios software configuration
Również dla Cisco 2800 Series: Skrócona instrukcja obsługi (13 strony), Arkusz danych (8 strony), Skrócona instrukcja obsługi (47 strony), Nota aplikacyjna (41 strony), Skrócona instrukcja obsługi (45 strony), Przegląd (27 strony), Arkusz danych (5 strony), Arkusz danych (20 strony), Konfigurowanie (32 strony)

Power Up and Initial Configuration Procedures

for Cisco 2800 Series Routers

This document describes how to power up your Cisco 2800 series integrated services router and perform

an initial configuration to provide network access. It includes the following sections:

•

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to

hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)

that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not

operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement

1029

This section covers the following topics:

•

You are ready to power up the Cisco router if the following steps are completed:

•

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Chassis is securely mounted and grounded.

Power and interface cables are connected.