Epson V11H248020 - MovieMate 30s WVGA LCD Projector Skrócona instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Projektor Epson V11H248020 - MovieMate 30s WVGA LCD Projector. Epson V11H248020 - MovieMate 30s WVGA LCD Projector 32 stron. Product support bulletin(s)
Również dla Epson V11H248020 - MovieMate 30s WVGA LCD Projector: Podręcznik szybkiej konfiguracji (6 strony), Konfiguracja (9 strony), Biuletyn wsparcia produktu (4 strony)
Drukuj stronę
Connecting the Audio Set Receiver
Before you begin, make sure that your audio system is turned off. Then follow the
steps in these sections on:
■
"Attaching the Antenna" below
■
"Powering the Receiver" on page 14
■
"Connecting the Receiver's Audio Cable" on page 14
Attaching the Antenna
1. Remove the red cap from the receiver's antenna connector.
2. Attach one of the included antennas to the receiver, then hand-tighten the nut
at the base of the antenna.
Caution:
Do not use a tool to tighten the nut, or you may damage the receiver.
3. If necessary, rotate the antenna so that it is facing upwards.
When you're finished attaching the antenna, see "Powering the Receiver" on
page 14.
Connecting the Audio Set Receiver
13