Cisco 7200 VXR Series Skrócona instrukcja obsługi - Strona 40
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco 7200 VXR Series. Cisco 7200 VXR Series 48 stron. Preparing for installation
Również dla Cisco 7200 VXR Series: Arkusz danych (12 strony), Podręcznik (14 strony)
Drukuj stronę
Replace the SFP–NPE-G2
Figure 22
Inserting an SFP Module into the NPE-G2 Gigabit Ethernet Port 0/1
L I N K
A C T V
E N
G IG A B IT
E T H E R
N E T 0 /
L IN K
A C T V
R J 4 5
E N
2
1
SFP port 0/1
Use the following procedure to install an SFP module in the NPE-G2:
Step 1
Attach an ESD-preventive wrist strap between you and an unpainted chassis surface.
Step 2
Locate the label on the SFP module and turn the SFP module so the label is on top and the alignment groove is down.
Note
The SFP module is keyed so that it cannot be inserted incorrectly.
Step 3
Insert the SFP module into SFP port 0/1, 0/2, or 0/3. The SFP module snaps into place when you have completely and
properly inserted it.
Step 4
Repeat Step 2 if you are inserting a second or third SFP module.
Installing a USB Flash Memory Module or eToken—NPE-G2
Figure 23
Connecting a USB Flash Memory Module to a Router USB Port
A U X
40
1
1
G IG A B IT
E T H E R
N E T 0 /
2
L IN K
A C T V
R J 4 5
E N
F E
L IN K
F E 0 /2
U S B
F O R M A
N A G E M
E N T
U S E O N
L Y
2
SFP module
U
S
B