Cisco 800 Series Podręcznik projektowania - Strona 30

Przeglądaj online lub pobierz pdf Podręcznik projektowania dla Bezprzewodowy punkt dostępowy Cisco 800 Series. Cisco 800 Series 50 stron. Fast step software design guide
Również dla Cisco 800 Series: Informacje o wersji (36 strony), Skrócona instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (17 strony), Konfigurowanie (32 strony)

TPL IP Stack Configuration Flags

Cisco 800 Fast Step version 2.4 and higher supports IP stack configuration flags. The flags are as

follows:

! SetForceStaticAddressOnPCAlways=0

! ForceStaticIPAddress=

! ForceStaticIPMask=

! SetForceDHCPClinetOnPCAlways=0

The identifier must be present in the header of the TPL file. For example:

! Cisco Fast Step Template

! SetForceStaticAddressOnPCAlways=0

! ForceStaticIPAddress=

! ForceStaticIPMask=

! SetForceDHCPClientOnPCAlways=0

The flags and their functions are as described in this section.

! SetForceStaticAddressOnPCAlways=

If this flag value is set to 1, the PC is set to a static IP address and mask according to the values given

in the flags ForceStaticIPAddress and ForceStaticIPMask. The PC is set to these static addresses before

trying to connect to the router.

If this flag value is set to 0, the IP address of the PC on which Cisco 800 Fast Step is running remains

unchanged.

! ForceStaticIPAddress=

This flag value indicates the IP address that is set on the PC before Cisco 800 Fast Step tries to connect

to the router. The value is considered only when the SetForceStaticAddressOnPCAlways flag value is

set to 1.

! ForceStaticIPMask=

This flag value indicates the IP mask that is set on the PC before the Cisco 800 Fast Step tries to connect

to the router. The value is considered only when the SetForceStaticAddressOnPCAlways flag is set to 1.

! SetForceDHCPClientOnPCAlways=0

If this flag value is set to 1, the PC is set as a DHCP client by Cisco 800 Fast Step after the router has

been configured.

If this flag value is set to 0, the PC IP stack is untouched.

Cisco 800 Fast Step Software Design Guide

3-2

Chapter 3

Template File Development

OL-10373-02